Now launching: antiques dealers are listing their first pieces · Are you an antiques dealer?

Antiques dealer? Join free →
Become a dealer
EUR €
  • Dealers set their prices in euros. Amounts shown in pounds and dollars are for guidance only, based on the European Central Bank rate and updated weekly.
AnticPlace Antiques dealers & exceptional pieces
EN

The Guide · Buying advice

Restoring without devaluing

Patina, varnish, mounts, upholstery: what to do and, above all, what not to do.

At a glance

Good restoration is minimal, reversible and documented. It stabilises the object without erasing the marks of age. The costliest mistakes are stripping the patina, varnishing a waxed piece, regilding original bronzes and replacing old components with new ones.

The principles

  • Intervene as little as possible: stabilise rather than remake.
  • Reversibility: glues and products that can be removed without damage.
  • Keep original components, even damaged ones: upholstery, mounts, hardware.
  • Document: before-and-after photographs and a record of all work carried out, to hand to the buyer on resale.

Costly mistakes

  • Stripping a piece of furniture: two centuries of patina vanish in an hour, and a large part of the value with them.
  • French polishing a piece that was originally waxed.
  • Regilding original bronzes: worn mercury gilding is worth more than new gilding.
  • Replacing a cracked original marble top instead of restoring it.

Choosing a restorer

Entrust valuable pieces to a restorer who specialises in the relevant discipline (cabinetmaking, gilding, bronze, ceramics) and is used to working for antiques dealers or museums, and ask for a detailed quote. AnticPlace's dealers can recommend their own restorers.

Carcass and joints

A loose joint should be reglued with animal glue (hide or bone glue, applied hot): this is the original glue of antique furniture, and it can be softened with heat and moisture should future work be needed. Vinyl, polyurethane and epoxy adhesives, which cannot be cleanly reversed, have no place on the carcass. A broken dowel is replaced with a wooden dowel, never a screw; metal brackets and plates screwed onto an old carcass are a very poor solution. For a graft, the restorer selects old timber of the same species and grain direction. Components removed and not reused, such as an old lock or a split back panel, should be kept and returned to the owner together with the restoration record.

Veneer and marquetry

  • Reglue rather than replace: a blister in the veneer can be injected with glue and pressed flat.
  • Fill losses with old veneer of the same wood and colour, following the grain, rather than with wood filler.
  • Never sand veneered surfaces: old veneer is thin, and sanding also cuts through the patina.
  • Keep any loose pieces of marquetry, however tiny, so they can be put back in place.

Respecting the original finish

Before any work, the finish must be identified: wax, shellac French polish, paint or gilding. The restorer first cleans gently, then revives or locally retouches losses without redoing everything. Damaged French polish can often be repaired, as shellac remains soluble in alcohol. Thick, plasticky modern varnishes should be avoided. Stains are applied only to repaired areas, to match the surrounding patina, never to the whole piece.

Bronzes, marble and giltwood

Gilt-bronze mounts should be cleaned without abrasives or brass polish, which strip the gilding; this is work for a specialist. A cracked marble top can be glued and dowelled; it is vulnerable to acidic products, which dull it irreparably, and should never be repolished to look new. On giltwood, the worst mistake is to hide wear with gold paint: the gilder fills losses with gold leaf and patinates the repairs so they blend into the whole.

To recognise restorations already present on a piece, see how to authenticate antique furniture.

Frequently asked questions

Should you restore a piece of furniture before selling it?
Not necessarily: heavy restoration can reduce value. Simple care (gentle cleaning, wax) is often enough; a buying dealer generally prefers to judge the original condition.
How should antique furniture be cared for?
Dust regularly, wax sparingly with beeswax, keep away from heat sources, damp and direct sunlight, and never use silicone-based products.
Should an old restoration be undone?
Not necessarily. An old restoration that is well executed and stable is part of the piece's history: removing it risks causing further damage. It should only be redone if it threatens the piece's preservation (failing glue, a poorly secured element) or seriously disfigures it. In every case, document it before any work is carried out.
Can an antique chair be reupholstered?
Yes, it is a routine job, as upholstery wears out long before the frame. Opt for traditional upholstery (webbing, springs, horsehair, hessian) rather than foam, and ask the upholsterer to reuse the old nail holes wherever possible: each reupholstery weakens the seat rail. Keep any fragments of original fabric found when the old upholstery is stripped.

Sources: Guillaume Janneau, Les Styles du meuble français, PUF, 'Que sais-je?' series · Musée des Arts décoratifs, Paris — permanent collections. Regulatory information is given for guidance only: please refer to the legislation currently in force.